RADAR REACT
SET-UP GUIDE
HOW THE RADAR REACT SYSTEM WORKS
TIMESTAMPS BY CHAPTER
00:00 – Introduction: Total Visibility
00:46 – The Six Connection Options
02:33 – Setup Introduction
03:01 – Prepare & Charge Lights
03:52 – Battery Status Indicator
04:14 – Install Radar Ally App
04:51 – Power On Lights & Pairing
06:00 – Control Lights From App
07:00 – Vehicle Detection Alerts
07:17 – Update & Customize Lights
07:39 – Customize React Drive Alerts
08:40 – Customize Radar Drive Alerts
09:34 – Inactivity Timer
09:51 – App Audio Alerts
10:42 – Disconnect & Close
11:57 – Turn Off Lights (Standby Mode)
12:45 – Shut Down Lights & Transmissions (Off Mode)
13:26 – App Auto Reconnect
13:46 – Forget Lights From App
14:11 – Setup Complete
14:24 – GPS Bike Computer Connection Overview
15:08 – Further Instructions & Support
15:40 – In-Use Montage
TIMESTAMPS BY CHAPTER
00:00 – Introduction: Total Visibility
00:46 – The Six Connection Options
02:33 – Setup Introduction
03:01 – Prepare & Charge Lights
03:52 – Battery Status Indicator
04:14 – Install Radar Ally App
04:51 – Power On Lights & Pairing
06:00 – Control Lights From App
07:00 – Vehicle Detection Alerts
07:17 – Update & Customize Lights
07:39 – Customize React Drive Alerts
08:40 – Customize Radar Drive Alerts
09:34 – Inactivity Timer
09:51 – App Audio Alerts
10:42 – Disconnect & Close
11:57 – Turn Off Lights (Standby Mode)
12:45 – Shut Down Lights & Transmissions (Off Mode)
13:26 – App Auto Reconnect
13:46 – Forget Lights From App
14:11 – Setup Complete
14:24 – GPS Bike Computer Connection Overview
Download the app
HOW THE RADAR REACT SYSTEM WORKS
RADAR REACT QUICK-START GUIDE
1. DOWNLOAD APP & PREPARE LIGHt(S)
Download the Lezyne Radar Ally app. Charge lights with compatible USB-C cable (not included). Scan QR Code on packaging for the latest manual. Watch full video tutorial here.
2. CONNECT & PAIR
Turn on Lights. Tap “connect” when you see your light. If you have a pair, go to menu and tap Connect (rear or front). Your front light is now also paired with the Radar Drive and will also provide vehicles alerts.
3. Update firmware
In the app menu, tap React and/or Radar light and update firmware if available.
4. Control & Customize
Use the app the customize the alert settings. Also use it to turn lights on and off and/or change their modes.
5. App alerts
Use app to track rear-approaching vehicles in real-time. See real-time visual animations in the app, or keep in pocket for audio only alerts.
6. DISCONNECT
If you have a React front and Radar rear, they are now paired together. If you don’t want to use the app for alerts, in the menu select "Disconnect and Close" (Android) or swipe-close (iPhone). This will disconnect lights from the app and close it, but the front React light will still provide radar alerts.
LEZYNE RADAR ally app – OVERLAY FEATURE SETUP GUIDE
1. Download the Latest App Update
Open the Google Play Store and update to the latest version of the Lezyne Radar Ally app. After updating, connect your Android device to your Radar Drive rear light.
2. Enable the Overlay Feature
Open the Radar Ally app menu and locate “Floating Vehicle Alerts Overlay.” Toggle the feature on to activate the overlay functionality.
3. Move the Vehicle Alert Overlay
Press and hold the overlay on your screen, then drag it to any position that works best with your navigation or riding apps.
4. Access Additional Controls
Tap the overlay to open quick LED controls. From here you can turn connected lights on or off and adjust available settings directly.
5. Minimize the Overlay
Minimize the overlay to a small circular icon to keep the interface unobtrusive while still receiving simplified vehicle alerts.
